18
Nov
After the strong winds and drizzle yesterday, the weather in China has become colder and colder.
However, the street view after the rain is still worthy of appreciation.
The cold weather in China has quietly come. The following are the weather conditions in Shandong.
Please prepare thick... read more
23
Mar
When it comes to mining operations, underground work requires a different set of considerations compared to surface mining. In particular, the motor selection for mining fans used in underground operations is critical to the safety and efficiency of the mining process. Here are some... read more
19
Nov
With the rapid development of the modern industry, we are generally inseparable from the mining fan equipment in the production of the industry, but when we are generally in the mining production, which kind of machine will be used? Follow the small editor to... read more
01
Jul
We are honored to announce that our centrifugal fans have been upgraded to meet the needs of Swiss customers. This esteemed customer not only requires efficient heat dissipation fans, but also has strict requirements for flue gas temperature, reaching up to 250 ℃!
To ensure... read more
16
Sep
On September 16th, the company organized a training course for managers, which enabled me not only to learn what management is theoretically at a deeper level but also to be inspired ideologically, from which I learned more about how to stand up for myself... read more
30
Nov
Coking plant pipe belt head bag filter project steel ironworks 400m2 sintering machine finished product electrostatic precipitator efficiency improvement project.
The main shaft of the fan meets the requirements of UT level 2 flaw detection. The shaft plate on which the impeller is installed is... read more
14
Jul
We are delighted to announce Decent Machinery successful collaboration with gold mine in Vietnam for their ventilation main fan project, establishing a long-term partnership. Vietnam has always been a highly regarded market for Decent Machinery, and this year we have secured a significant project... read more
25
Oct
Whenever the heating season arrives, most areas in the north will be accompanied by smog. Since the “13th Five-Year Plan”, the central and local governments have paid special attention to the control of environmental pollution, especially smog. The central government has demarcated the Beijing-Tianjin-Hebei air pollution transmission channel for it and directly subsidized the “2+26” cities from the central government to control smog pollution. So the north began the tide of coal-to-electricity and coal-to-clean energy.
Two or three years ago, most people didn’t know much about air-to-air heat pump products. If they were slightly impressed, they might be air-to-water heaters, but they didn’t know anything about other products. Such as air-energy floor heating and air-conditioning integrated machine, air-energy heat pump dryer, and so on. After the popularization of “coal-to-electricity” in the north, most people know what an air energy heat pump is. So what is the difference between the ultra-low temperature air energy heat pump used in the north and the ordinary air energy heat pump?
The operating conditions of the two are different.
We all know that the working principle of the air energy heat pump is to convert the heat in the air into the available high heat energy through the compressor, and then exchange it with the water system to provide hot water, heating, cooling, drying, and other purposes. The temperature environment in which the ordinary air source heat pump operates is preferably within minus 10 ℃. If it operates at minus 10 to 25 ℃, it may appear:
1. Compressor is prone to failure
The temperature of the exhaust gas rises rapidly, and the overheating of the working medium is too high. In the case of overheating of the working medium, the thermal conductivity of the working medium in the condenser decreases sharply, and at the same time, the temperature of the lubricating oil increases and the viscosity decreases, which affects the normal lubrication of the compressor.
2. The unit cannot defrost
In frequent rain and snow weather and low temperature, the defrosting ability of the unit is easily weakened. Because the air intake of the unit is too small, the density of the air that can be inhaled is reduced. With the accumulation of time, the thickness of the frost layer is getting higher and higher. Therefore, the unit will reduce the circulation of the refrigerant due to the decrease in the air conversion capacity, and the overall heating capacity will decrease.
The two technologies involved are different
Because of the difference in an ambient temperature between the north and the south, most air energy heat pump manufacturers are located in the southern Guangdong area. The air energy market in the south is extensive. The earliest product is also an air energy water heater. With the development of air energy, its technology is also becoming more and more mature. Heating has also gained a firm foothold in the north, which is also the fundamental reason for the breakthrough growth of coal-to-electricity air-energy heat pumps in the north in the past three years.
So what kind of technology does low-temperature air energy have to gain a firm foothold in the cold northern regions? There are three main points:
1. Ultra-low Temperature air Energy Operation Technology Air energy heat pump manufacturers have their own ultra-low temperature technology. Since the air energy heat pump host is generally installed outdoors, the phenomenon of frost will frequently occur in rainy and snowy weather. The ultra-low temperature air energy heat pump host can intelligently judge the defrosting needs, and intelligently judge whether to defrost according to the operating conditions of the unit (running time, exhaust temperature, etc.), combined with the ambient temperature and frost thickness. Defrost with frost and no defrost without frost, greatly extending the defrosting cycle, shortening the defrosting time by 20%, and ensuring the efficient operation of the unit.
2. Jet Enthalpy Technology
Because the heating efficiency of the air-energy heat pump in extremely cold weather will be greatly attenuated, resulting in an unsatisfactory heating effect. The ultra-low temperature air energy heat pump uses the jet enthalpy increase technology to create a second suction port on the scroll, and through the second suction circuit, the refrigerant flow is increased, and the circulation volume of the unit is increased during cooling. Compared with the general unit, the cooling capacity is increased by 10%, which greatly improves the refrigerant circulation system, makes full use of the refrigerant flow and utilization rate in the compressor, and improves the stability of the system operation and the heating efficiency.
3. Shell and Tube Heat Exchanger
Ordinary air can use a plate heat exchanger, which is easy to scale and block the flow passage. Low-temperature air can use copper tubes with internal thread and external fins. The water inside the tube and fluorine outside the tube. The heat exchange area is large and the heat exchange efficiency is high.
read more
06
Jul
ZIBO Decent warmly welcomes all our esteemed customers to visit our company in the vibrant CBD area of Zibo, Shandong. Nestled amidst the breathtaking scenery, our office location offers a picturesque view that is sure to captivate your senses.
Located conveniently near our premises is... read more
07
Feb
We are thrilled to invite you to an upcoming online meeting with our team to discuss the details of our innovative products.
Our team is dedicated to providing the best possible solutions to meet your needs, and we believe this meeting will be a great... read more