Baghouse 0.3 Micron PLC Pulse Jet Vacuum Cleaner For Gold Mining

Baghouse 0.3 Micron PLC Pulse Jet Vacuum Cleaner For Gold Mining

The detail information of product:

Source: China
Certifications: SGS ISO CE
Model Number: PPC64-6


Minimum order quantity: Negotiate
Price: Negitionable
Packing details: Plastic film inner packing, export special wooden box outside packing.
Delivery time: 30 days after receiving the payment
Terms of payment: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Ability to provide: 100 sets/sets per month


  • Description
  • Inquiry

bag jet dust collector for gold mining

The bag vacuum cleaner is a new type of vacuum cleaner with international high efficiency. It combines the advantages of reverse flow in auxiliary room and pulse bag house together, overcoming the disadvantage of filter strength. low dust, the defects of dust and filter cleaning cause double dust collection capacity to widen the application range of bag filter.The collector adopts efficient offline cleaning method, resulting in efficient high, long service life of filter bag, low resistance, etc.It is widely used in building materials, metallurgy, chemical industry to filter dust.
This collector is outdoor type made up of different chambers, and filter bag has many types, that is 32, 64, 96 and 128. Diameter of filter bag is Φ130mm and length 2450mm or 3060mm. Waste concentration can be less than 20mg/Nm³ if the dust collection concentration is less than 1000g/Nm³.When the outside temperature is less than or equal
to 5-25, heating device should be installed.
Technical parameters

Device model DMC-24 DMC-32 DMC-36 DMC-48 DMC-64 DMC-80
Total filter area m² 20 25 30 40 50 sixty four
Filtration velocity m³/min 1.0-2.0
Air volume m³ / h 1200-2400 1500-3000 1800-3600 2400-4800 3000-6000 3840-7680
Number of filter bags 24 32 36 48 sixty four 80
Specification and material of filter bag 130 * 2000mm
Air outlet dust concentration mg/m³ 30
Negative pressure whiskers Pa 5000
Equipment that runs on Pa . Resistor 800-1200
Injection pressure Mpa 0.4-0.6
Electromagnetic Specifying DMF-Z-25 (G1″)
Amount 4 4 6 6 8 8
Induction draft fan model 4-72-2.8A 4-72-3.2A 4-72-3.6A 4-72-3.6A 4-72-4A 4-72-4.5A
The power of the engine 1.5kw 2.20kw 3kw 4kw 5.5kw 7.5kw




  1. The net filter area in the table refers to the filtration area when a room is cleaned. The total weight of the unit does not include the weight of the insulation.
  2. The gas consumption in the table refers to the centralized gas supply situation in the plant. If a separate air compressor is installed, the air consumption in the table is multiplied by 1.3.

Working principle:

When the gas enters the cloth bag dust collector from the air induction system, due to the reduced wind speed, the dust particles with a large density settle into the ash hopper, and the lighter dust depends on the air induction to to the surface of the dust removal filter bag. The dust collector nag filter usually uses the needle seal as the filter carrier, and the filter accuracy can reach <1 um, Dust is prevented on the surface by filter bag and dust is filtered through the filter bag. Over time, more and more dust is collected on the surface of the filter bag, so the resistance of the filter bag gradually increases, so that the vacuum cleaner works properly, when the resistance increases to a limited range, the electronic pulse controller give instructions to follow in order. Sequence activate each control valve to open the pulse valve and the compressed air in the air bag of the dust collector is sprayed into the corresponding filter bag according to each nozzle of the spray line . The filter bag expands rapidly under the instantaneous reverse action of the air flow, making the filter bag achieve the most original air filtration effect. The cleaned dust falls into the ash hopper and exits the body through the ash removal system to complete the whole ash filtration and cleaning process.

Contact Us