05
Mar
Do you need a professional woodworking dust collector manufacturer to customize the dust removal equipment you need?
Then, you may wish to consider Decent Dust Collector Dust Collector Dust Collector Dust Collertor, a professional woodworking dust collector manufacturer integrating design, production and sales.
In order to... read more
24
Nov
Air conditioning, or air conditioner, refers to the process of adjusting and controlling the temperature, humidity, cleanliness, speed and other parameters of the ambient air in a building/structure using manual means.
Central air conditioning: The central air conditioning system consists of a cold and heat... read more
03
Jul
As a leading exporter of air handling units (AHUs), Zibo Decent Machinery have successfully provided accurate solutions for AHU selection based on our customers’ requirements, and effectively presented them through selection reports.
We have a comprehensive understanding of our customers’ specific needs, including air flow... read more
12
Nov
Tunnel fans, also called tunnel jet fans, tunnel fans, and jet fans, are widely used in the practical application of water conservancy dam projects, highways, railways, subways, and other tunnels. In fact, there are many kinds of ventilation methods in the tunnel fan, such... read more
12
Dec
1. Ventilation
Ventilation is a machine that relies on the input mechanical energy to increase the gas pressure and discharge the gas. It is a driven fluid machine.
Fans are widely used in ventilation, dust removal, and cooling of factories, mines, tunnels, cooling towers, vehicles, ships, and buildings; ventilation and drafting of boilers and industrial furnaces;
Cooling and ventilation in air-conditioning equipment and household appliances; drying and sorting of grain; wind tunnel wind source and inflation and propulsion of hovercraft, etc.
The working principle of the ventilator is basically the same as that of the turbo compressor, but because the gas flow rate is low and the pressure changes little, it is generally not necessary to consider the change of the gas-specific volume, that is, the gas is treated as an incompressible fluid.
2. Blower
Under design conditions, a fan with a wind pressure of 15kPa~0.2MPa or a compression ratio e=1.15~3 is called a blower.
Features:
1. Since the impeller runs without friction in the body, no lubrication is required, so the discharged gas does not contain oil. It is an ideal pneumatic conveying gas source for chemical, food and other industries.
2. The blower is a volumetric operation type blower. When in use, with the change of pressure, the flow rate changes very little. But the flow rate changes with the speed. Therefore, the selection range of pressure services is very wide, and the selection of flow rate can meet the needs by selecting the speed.
3. The speed of the blower is high, and the gap between the rotor and the rotor, and between the rotor and the body is small, so there is less leakage and higher volumetric efficiency. Our factory has strong processing and assembly technology, which can ensure a reasonable and uniform gap, achieve high volumetric efficiency and avoid friction in the body due to thermal expansion.
4. The structure of the blower determines that its mechanical friction loss is very small. Because only the bearing and the gear pair have mechanical contact in the material selection, the rotor, casing, and gear ring have sufficient mechanical strength. Safe operation and long service life are major features of blower products.
read more
02
Feb
When selecting a dust collector, it is important to consider the size, type, and composition of the dust particles that need to be collected.
Different dust collector models may be better suited for different tasks, such as cyclone dust collectors for large, heavy-duty particles and... read more
20
Apr
Sprinkling water to suppress dust is the most traditional method of controlling urban dust in my country.
However, the disadvantage of Sprinkling water is also very obvious, that is, it consumes a huge amount of water during the application process. Therefore, the application of the... read more
19
May
Multi-stage centrifugal fans are widely used in various industries for their ability to generate high pressures and move large volumes of air. When designing and selecting the materials for these fans, two key aspects need to be considered: the fan casing materials and the... read more
26
Mar
Zibo Decent Machinery introduces an innovative solution to dust suppression and water conservation with its advanced fog cannon truck. This multifunctional vehicle integrates high-power spraying and misting capabilities, equipped with large spray guns and road watering fog cannons to cater to diverse operational needs.... read more
26
Apr
The oil and gas industry, while critical for energy production, often faces challenges related to dust and air quality. DECENT Machinery has stepped in to address this need with its innovative fog cannon technology.
DECENT Machinery, a leading provider of advanced dust suppression technology, has... read more