Knowledge! Industrial Chiller Comprehensive Selection Methods and Techniques

As industrial manufacturing continues to advance, the demand for refrigeration is increasing, driving the expansion of the chiller market. Therefore, when selecting chillers based on their own needs, corresponding enterprises or companies need to comprehensively consider various aspects of chillers to improve refrigeration efficiency and quality.

1. Comprehensive Perspective Consideration

Firstly, choose reputable vendors with qualified product quality to effectively improve the quality and efficiency of chillers. It is necessary to clarify the parameters of the chiller and select a chiller with good refrigeration effects according to one’s own intelligent needs. It is important to consider the industry reputation of chiller manufacturers, consider cost-effectiveness based on one’s own needs, and also pay attention to after-sales service as an important factor in chiller purchase.

2. Selection Basis – Refrigeration Capacity

The refrigeration capacity of the chiller directly affects the normal operation of production equipment. If the refrigeration capacity is too small, it cannot achieve the desired cooling effect, but instead may reduce productivity and lead to downtime. Choosing a capacity that is too large will increase costs unnecessarily; the larger the refrigeration capacity, the higher the price. Therefore, scientifically and reasonably selecting the refrigeration capacity is crucial for chiller selection.

3. Optimizing Chiller Selection Solutions

It is necessary to pay attention to the relationship between temperature difference and flow rate. Different plastic products have different cooling temperatures, and a temperature difference of 3°C to 5°C is optimal. For smaller temperature differences, more ice water flow is needed to remove the same amount of heat, and vice versa. Ensure the most energy-efficient solution, comprehensively balance electricity, heat, and cold, especially in the utilization of waste gas and waste heat.

Reasonably control the noise pollution generated by chillers and scientifically handle toxic refrigerants to continuously improve environmental quality. Improve the quality of cooling water to avoid dirt clogging pipes, thereby reducing refrigeration capacity or causing damage to heat exchange pipes. In harsh environments, various flammable and explosive substances are present, so explosion-proof treatment is necessary according to the working environment of the chiller to select the most suitable chiller unit solution.

Based on the specific refrigeration needs of chillers, choose chillers suitable for their own refrigeration needs, comprehensively consider environmental factors, human factors, architectural factors, and technical normative requirements, etc., to effectively improve the scientific and reasonable selection of chillers.

The above is Decent’s specific proposal for the diverse needs of the refrigeration industry and its own refrigeration needs, providing the best chiller selection solutions to scientifically guide chiller users in their selection process.