Today is our monthly inspection in domestic project.
Location: LuZhong Mining Group
Year of fan production (fan): 2014
FBCDZ (BDK) series mine explosion-proof withdrawable counter-rotating axial flow fan is suitable for coal mine, metal, non-metal mine ventilation field.
Product main features
1. Won a number of national... read more
Our specially-invite engineer, Mr.Branislav Mihajlovic from Serbia, has maintained a good cooperative relationship with our company for over 7 years.We have designed ventilation systems for over 150+ mine projects around the world, including Iranian copper mine,Serbian zinc mine, and Colombian gold mine. . .
We share common ideals and values, strive to provide safe, stable and reliable mine ventilation solutions for more mining projects in the world.
Sorry, this entry is only available in Russian.
Today I will introduce our company environment and culture.
Upon entering the door, our customer’s photo wall attracts attention.
Next is the employee office area，the busiest place in the company.
The most casual place is the tea room，various snacks, drinks and other things.
There is also a small... read more
When the fan is working, the airflow enters the blade space from the axial direction of the fan, and then rotates with the impeller under the drive of the impeller; on the other hand, it increases energy under the action of inertia and leaves... read more
Today, we went to the Roots blower factory for a site inspection. Our company has introduced automatic technology equipment to carry out digital automatic finishing of accessories, which has effectively improved the quality and efficiency. At the same time, we can use an aluminum... read more
A tunnel jet fan is a subway and tunnel fan used more on the market at present. The tunnel jet fan produced by Dingxian Air Machine factory has the characteristics of high efficiency and energy saving, low noise and environmental protection, easy operation, and... read more
Whenever the heating season arrives, most areas in the north will be accompanied by smog. Since the “13th Five-Year Plan”, the central and local governments have paid special attention to the control of environmental pollution, especially smog. The central government has demarcated the Beijing-Tianjin-Hebei air pollution transmission channel for it and directly subsidized the “2+26” cities from the central government to control smog pollution. So the north began the tide of coal-to-electricity and coal-to-clean energy.
Two or three years ago, most people didn’t know much about air-to-air heat pump products. If they were slightly impressed, they might be air-to-water heaters, but they didn’t know anything about other products. Such as air-energy floor heating and air-conditioning integrated machine, air-energy heat pump dryer, and so on. After the popularization of “coal-to-electricity” in the north, most people know what an air energy heat pump is. So what is the difference between the ultra-low temperature air energy heat pump used in the north and the ordinary air energy heat pump?
The operating conditions of the two are different.
We all know that the working principle of the air energy heat pump is to convert the heat in the air into the available high heat energy through the compressor, and then exchange it with the water system to provide hot water, heating, cooling, drying, and other purposes. The temperature environment in which the ordinary air source heat pump operates is preferably within minus 10 ℃. If it operates at minus 10 to 25 ℃, it may appear:
1. Compressor is prone to failure
The temperature of the exhaust gas rises rapidly, and the overheating of the working medium is too high. In the case of overheating of the working medium, the thermal conductivity of the working medium in the condenser decreases sharply, and at the same time, the temperature of the lubricating oil increases and the viscosity decreases, which affects the normal lubrication of the compressor.
2. The unit cannot defrost
In frequent rain and snow weather and low temperature, the defrosting ability of the unit is easily weakened. Because the air intake of the unit is too small, the density of the air that can be inhaled is reduced. With the accumulation of time, the thickness of the frost layer is getting higher and higher. Therefore, the unit will reduce the circulation of the refrigerant due to the decrease in the air conversion capacity, and the overall heating capacity will decrease.
The two technologies involved are different
Because of the difference in an ambient temperature between the north and the south, most air energy heat pump manufacturers are located in the southern Guangdong area. The air energy market in the south is extensive. The earliest product is also an air energy water heater. With the development of air energy, its technology is also becoming more and more mature. Heating has also gained a firm foothold in the north, which is also the fundamental reason for the breakthrough growth of coal-to-electricity air-energy heat pumps in the north in the past three years.
So what kind of technology does low-temperature air energy have to gain a firm foothold in the cold northern regions? There are three main points:
1. Ultra-low Temperature air Energy Operation Technology Air energy heat pump manufacturers have their own ultra-low temperature technology. Since the air energy heat pump host is generally installed outdoors, the phenomenon of frost will frequently occur in rainy and snowy weather. The ultra-low temperature air energy heat pump host can intelligently judge the defrosting needs, and intelligently judge whether to defrost according to the operating conditions of the unit (running time, exhaust temperature, etc.), combined with the ambient temperature and frost thickness. Defrost with frost and no defrost without frost, greatly extending the defrosting cycle, shortening the defrosting time by 20%, and ensuring the efficient operation of the unit.
2. Jet Enthalpy Technology
Because the heating efficiency of the air-energy heat pump in extremely cold weather will be greatly attenuated, resulting in an unsatisfactory heating effect. The ultra-low temperature air energy heat pump uses the jet enthalpy increase technology to create a second suction port on the scroll, and through the second suction circuit, the refrigerant flow is increased, and the circulation volume of the unit is increased during cooling. Compared with the general unit, the cooling capacity is increased by 10%, which greatly improves the refrigerant circulation system, makes full use of the refrigerant flow and utilization rate in the compressor, and improves the stability of the system operation and the heating efficiency.
3. Shell and Tube Heat Exchanger
Ordinary air can use a plate heat exchanger, which is easy to scale and block the flow passage. Low-temperature air can use copper tubes with internal thread and external fins. The water inside the tube and fluorine outside the tube. The heat exchange area is large and the heat exchange efficiency is high.
Mining operations often require specialized equipment to ensure safe and efficient ventilation. Two commonly used types of fans in mining are the mining explosion-proof pneumatic fan and the counter-rotating mine fan. While both serve the purpose of ventilating underground mines, they differ in several... read more
Today is the weekly reading and sharing session.
Every employee will publish their reading experience.
The company also provides employees with leisure places after meals — Book Corner.
All kinds of books are available, providing convenience for employees.
The atmosphere of the company is harmonious, focusing on the... read more