Large Powder Industry ISO Bag Filter Vacuum Cleaner
The detail information of product:
|Brand stuff:||DECENT MACHINERY|
|Certifications:||SGS ISO CE|
|Minimum order quantity:||Negotiate|
|Packing details:||Plastic film inner packing, export special wooden box outside packing.|
|Delivery time:||30 days after receiving the payment|
|Terms of payment:||L/C, D/A, D/P, T/T, Western Union, MoneyGram|
|Ability to provide:||100 sets/sets per month|
New arrival filter bag dust collector large powder dust collector industrial dust collector
Introduction of pulse vacuum cleaner
Pulse bag vacuum cleaner is composed of ash hopper, upper box body, middle box body, lower box body, etc. The upper, middle and lower boxes have a sub-chamber structure. When working, the gas contains dust. entering the ash hopper through the air inlet, the coarse dust particles directly fall to the bottom of the ash hopper.The gas enters the upper box body to the clean air collection tube – the exhaust pipe, and is discharged to the atmosphere through the exhaust fan. The cleaning process is to first cut off the clean air outlet pipe of the room, leave the cloth bag in the state without airflow (the room divides the air to remove ash). Then open the pulse valve and Use compressed air to blow and clean the pulse. The closing time of the shut-off valve is just enough to ensure that the dust removed from the filter bag settles into the hopper after blowing, preventing dust from following the airflow after leaving the filter bag’s surface causing damage. pass statue. the surface of the adjacent filter bag makes the filter bag completely clean, and the discharge valve, pulse valve and ash discharge valve are controlled fully automatically by a programmable controller.
|Model Specification||Filter area m²||Dust concentration g/m³||Filter wind speed||Filtered air volume||Effective%||Resistance (pa)||Size|
|HZ-24||18||<15||43500||2160-4320||99.5||120-150||1090 * 1678 * 3667|
|HZ-36||27||<15||43500||3240-6480||99.5||120-150||1490 * 1678 * 3667|
|HZ-48||36||<15||43500||4320-6480||99.5||120-150||1890 * 1678 * 3667|
|HZ-60||45||<15||43500||5400-10800||99.5||120-150||2290 * 1678 * 3667|
|HZ-80||63||<15||43500||7560-15120||99.5||120-150||3090 * 1678 * 3667|
|HZ-96||72||<15||43500||8650-17280||99.5||120-150||3690 * 1678 * 3667|
|HZ-120||99||<15||43500||10800-21890||99.5||120-150||3890 * 1700 * 3667|
Features of the pulse bag filter
1.Pulsed bag vacuum cleaner  Adopts the air ash cleaning technology that divides the room, overcoming the shortcomings of ordinary pulse vacuum cleaners and vacuum cleaners. subdivided chamber back-blowing dust.It has strong dust removal ability, high dust removal efficiency, emission concentration and low air leakage rate.Small, low energy consumption, low steel consumption, Less floor space, stable and reliable operation and good economic benefit. It is suitable for dust gas purification and material recovery in metallurgy, building materials, cement, machinery. , chemical, electric power and light industries.
2.Due to the use of split chamber air pulse ash cleaning method, the purpose of complete ash cleaning can be achieved with just one spray, thus prolonging the ash cleaning cycle, reducing consumption ash cleaning energy consumption and compressed air consumption can be greatly reduced. At the same time, filter bag and pulse valve fatigue are reduced respectively, which doubles the service life of filter bag and valve disc.
3.Bag maintenance and replacement can be carried out in separate rooms under the condition that the fan system is not stopped and the system is operating normally. The filter bag mouth uses an elastic elastic ring, which is effective. Good sealing performance, firm and reliable. The filter bag mill has a polygonal shape, which reduces the friction between the bag and the keg, prolongs the life of the bag, and makes it easy to unload the bag.
4.The upper bag extraction method is adopted. After the skeleton is removed when changing the bag, the dirty bag is put into the ash hopper in the lower part of the box and taken out from the manhole, which improves the transportation condition. operation of the bag change process.
5.The box body adopts airtight design with good sealing performance.The inspection door adopts excellent sealing material.In the production process, kerosene is used to detect the leak, and the leakage rate very low air leakage.
6.The inlet and outlet air ducts are neatly arranged, the air resistance is small.