Pakistan customer with 40 years history visited us and placed orders for us today.
After the tour in our factory and meeting, the customer sets a high value on us and hope to
have long term cooperation in the future.
Pakistan customer with 40 years history visited us and placed orders for us today.
After the tour in our factory and meeting, the customer sets a high value on us and hope to
have long term cooperation in the future.
The laser welding equipment and laser cutting equipment exported by our company can cut stainless steel sheets with a thickness of less than 6mm, carbon steel sheets can be cut to less than 14mm, hand-held welding equipment can weld stainless steel sheets and mild... read more
Our dust collector is designed for industrial environments where air pollution control is essential. It can be used in a wide range of applications including but not limited to. woodworking, metalworking, cement manufacturing, and food processing. The dust collector works by drawing in contaminated air and... read more
Whenever the heating season arrives, most areas in the north will be accompanied by smog. Since the “13th Five-Year Plan”, the central and local governments have paid special attention to the control of environmental pollution, especially smog. The central government has demarcated the Beijing-Tianjin-Hebei air pollution transmission channel for it and directly subsidized the “2+26” cities from the central government to control smog pollution. So the north began the tide of coal-to-electricity and coal-to-clean energy. Two or three years ago, most people didn’t know much about air-to-air heat pump products. If they were slightly impressed, they might be air-to-water heaters, but they didn’t know anything about other products. Such as air-energy floor heating and air-conditioning integrated machine, air-energy heat pump dryer, and so on. After the popularization of “coal-to-electricity” in the north, most people know what an air energy heat pump is. So what is the difference between the ultra-low temperature air energy heat pump used in the north and the ordinary air energy heat pump? The operating conditions of the two are different. We all know that the working principle of the air energy heat pump is to convert the heat in the air into the available high heat energy through the compressor, and then exchange it with the water system to provide hot water, heating, cooling, drying, and other purposes. The temperature environment in which the ordinary air source heat pump operates is preferably within minus 10 ℃. If it operates at minus 10 to 25 ℃, it may appear: 1. Compressor is prone to failure The temperature of the exhaust gas rises rapidly, and the overheating of the working medium is too high. In the case of overheating of the working medium, the thermal conductivity of the working medium in the condenser decreases sharply, and at the same time, the temperature of the lubricating oil increases and the viscosity decreases, which affects the normal lubrication of the compressor. 2. The unit cannot defrost In frequent rain and snow weather and low temperature, the defrosting ability of the unit is easily weakened. Because the air intake of the unit is too small, the density of the air that can be inhaled is reduced. With the accumulation of time, the thickness of the frost layer is getting higher and higher. Therefore, the unit will reduce the circulation of the refrigerant due to the decrease in the air conversion capacity, and the overall heating capacity will decrease. The two technologies involved are different Because of the difference in an ambient temperature between the north and the south, most air energy heat pump manufacturers are located in the southern Guangdong area. The air energy market in the south is extensive. The earliest product is also an air energy water heater. With the development of air energy, its technology is also becoming more and more mature. Heating has also gained a firm foothold in the north, which is also the fundamental reason for the breakthrough growth of coal-to-electricity air-energy heat pumps in the north in the past three years. So what kind of technology does low-temperature air energy have to gain a firm foothold in the cold northern regions? There are three main points: 1. Ultra-low Temperature air Energy Operation Technology Air energy heat pump manufacturers have their own ultra-low temperature technology. Since the air energy heat pump host is generally installed outdoors, the phenomenon of frost will frequently occur in rainy and snowy weather. The ultra-low temperature air energy heat pump host can intelligently judge the defrosting needs, and intelligently judge whether to defrost according to the operating conditions of the unit (running time, exhaust temperature, etc.), combined with the ambient temperature and frost thickness. Defrost with frost and no defrost without frost, greatly extending the defrosting cycle, shortening the defrosting time by 20%, and ensuring the efficient operation of the unit. 2. Jet Enthalpy Technology Because the heating efficiency of the air-energy heat pump in extremely cold weather will be greatly attenuated, resulting in an unsatisfactory heating effect. The ultra-low temperature air energy heat pump uses the jet enthalpy increase technology to create a second suction port on the scroll, and through the second suction circuit, the refrigerant flow is increased, and the circulation volume of the unit is increased during cooling. Compared with the general unit, the cooling capacity is increased by 10%, which greatly improves the refrigerant circulation system, makes full use of the refrigerant flow and utilization rate in the compressor, and improves the stability of the system operation and the heating efficiency. 3. Shell and Tube Heat Exchanger Ordinary air can use a plate heat exchanger, which is easy to scale and block the flow passage. Low-temperature air can use copper tubes with internal thread and external fins. The water inside the tube and fluorine outside the tube. The heat exchange area is large and the heat exchange efficiency is high. read more
ZIBO Decent Machinery Co.Ltd is a professional factory specializing in the production of 35t/h-670t/h boilers and supporting centrifugal fans, smoke pump, ID fan for chemical plants, steel plants, coking plants, cement plants, etc. Its products have the following significant advantages: 1. High efficiency, low noise... read more
1.Do the impeller balance testing before leaving the factory. 2.During the rotation of the impeller, the pattern on the impeller will affect the judgment of the eye, and it cannot be judged by whether it looks round. 3.The number represented in the picture is the unbalanced... read more
At Decent Machinery, we understand that many customers have concerns about the quality and price of our products when they first start working with us. That’s why we are dedicated to ensuring that our customers get the best value for their money. Our products... read more
Come to our factory for an inspection today, this is a centrifugal fan to be exported to India. First of all, we tested the air volume, pressure, current, and voltage of the fan. Second, we came outside to test the speed, vibration, and noise of... read more
Are you tired of dealing with the uncertainty and stress of international trade? Look no further. Our company specializes in providing comprehensive solutions to the most common concerns of our customers in international trade. We understand that the logistics of international shipping can be complicated... read more
Under the high-speed operation of the fan, the speed of the pulley and the pulley increases, which is easy to cause accidental injury to the operator. The protective cover not only effectively protects and prevents the belt and pulley from being subjected to external harsh... read more
Yesterday acquired the third-party audit and audit employer of Russian customers, the TUV certification agency. The client is the greatest herbal gasoline processing and petrochemical integration agency in Russia. The patron wishes to buy centrifugal blowers, triggered draft followers, and root blowers for the... read more