07
Sep
In-depth talks with Azerbaijani customers through video
Location: Azerbaijan Steel Plant
Video key points:
1. Show the customer the robot welding the impeller and the casing, the welding seam can be done very well by using the robot welding
2. Show customers the production process of the entire workshop
3. It is the only factory in the province that has laboratory tests. Each fan will be tested in the laboratory after production.
read more
11
Feb
These devices work by directing a high-pressure spray of water or other liquids onto dust-generating sources, such as construction sites, mining operations, and industrial processes.
The water droplets capture the dust particles and prevent them from becoming airborne, reducing the amount of dust that is... read more
15
Jul
Recent research has revealed the close relationship between dynamic pressure, static pressure, and total pressure in industrial centrifugal fans, which is of significant importance in improving fan performance. These key parameters play a crucial role in the analysis of industrial centrifugal blowers.
In the analysis... read more
25
Feb
1. Poor shaft installation
a. Make adjustments and re-align.
b. Make adjustments to leave an appropriate allowance for displacement compensation.
2. The fixed part of the rotor is loose or movable.
a. Weld the alloy of the bushing, adjust the gasket, or scrape the middle line of the... read more
08
Mar
As industrial manufacturing continues to advance, the demand for refrigeration is increasing, driving the expansion of the chiller market. Therefore, when selecting chillers based on their own needs, corresponding enterprises or companies need to comprehensively consider various aspects of chillers to improve refrigeration efficiency... read more
06
Jan
At the initial stage of centrifugal fan impeller operation and during all regular inspections, as long as there is an opportunity, the impeller must be inspected for cracks, wear, dust and other defects. As long as possible, it is necessary to keep the impeller clean, and regularly use a wire brush to remove the dust and rust on it, because as the running time increases, it is impossible for these dust to evenly adhere to the impeller of the centrifugal fan. And cause the impeller balance of the centrifugal fan to be damaged, so as to cause the rotor to vibrate. As long as the centrifugal fan impeller is repaired, it needs to be dynamically balanced again. If possible, a portable test dynamic balancer can be used to balance on site. Before performing dynamic balancing, it is necessary to check whether all set bolts are tight. Because the centrifugal fan impeller has been running unbalanced for some time, these bolts may have come loose.
read more
10
Feb
Steel ironmaking plant 400m2 sintering machine finished product electrostatic precipitator efficiency improvement project dust removal fan
The main shaft of the fan meets the requirements of UT level 2 flaw detection. The shaft disk on which the impeller is installed is an integral forged structure.
The... read more
03
Apr
Mine fans work on the principle of centrifugal force. They comprise a rotating impeller that draws air in from the outside and expels it into the mine. The impeller’s blades are angled in a way that creates a pressure differential, forcing the air towards... read more
23
Feb
Product Name:Rotary Heat Recovery Fresh Air Unit
Scope of Application:
● Airflow range: 200-1000m3/h
● Commercial air-conditioning systems:
Star hotels, high-grade office buildings, centralized heating and cooling residential buildings, large supermarkets, bus stations, railway stations, airplane waiting rooms, hospitals, indoor gymnasiums, swimming pools and so on.
●Industrial air-conditioning systems:
Printing... read more
13
Jan
The inverter compressor primarily achieves flow control by changing the motor speed of the compressor through altering the power supply frequency. As refrigeration systems typically operate below their rated load, inverter compressors can function at low frequencies and low cooling capacities to maintain thermal... read more