Manual Cartridge Filter 372m2 Pulse Bag Type Union Vacuum Cleaner with Internal Fan

Cartridge filter Alliance Jet vacuum cleaner with internal fan

Pulse jet vacuum cleaner

1.Pulse width setting: adjust directly to required time.Tip: In working state, set this setting time less than pulse interval time.
2. Pulse interval setting: direct adjustment to required time.
3. Preset: Press preset button to select desired channel number.
4. Setting the cascade function: can only be set when the working channel number is displayed normally. After pressing this button, there will be a decimal point on the unit digit of the digital tube, means that the pulse dust collector has entered the cascade main mode; when this button is pressed again, it will appear on the digital tube. Both decimal points are always on, which means the pulse dust collector controller entered cascading sub-panel mode; in sub-panel mode pressing this button exits cascading mode.
5. In manual operation function: In the normal channel number display state, after pressing this button, the controller enters the next channel working cyclically.
Technical parameters

paradigm		PPC32-3	PPC32-4	PPC32-5	PPC32-6	PPC64-4	PPC64-5	PPC64-6	PPC64-7	PPC64-8
Air handling (m3/h)		6900	8900	11160	13390	17800	22300	26700	31200	35700
Filter wind speed (m/min)		1.2-2.0 (select different purge air speeds according to different dust spots)
Total filter area (m2)		ninety three	124	155	186	248	310	372	434	496
Filter net area (m2)		62	ninety three	124	155	186	248	310	372	434
Number of vacuum cleaners (units)		3	4	5	6	4	5	6	7	8
Total number of filter bags (sticks) (pcs)		96	128	160	192	256	320	384	448	512
Ash Pressure Shrink Air	Pressure (Pa)	(5-7) × 105
	Air Consumption (m3/min)	0.27	0.37	0.46	0.55	1.2	1.5	1.8	2.1	2.4
Pulse valve	amount)	3	4	5	6	4	5	6	7	8
	Specifications (inches)	1-1 / 2				2-1 / 2
Poppet valve (with cylinder)	amount)	3	4	5	6	4	5	6	7	8
	Specification (mm)	Lift valve plate diameter 460, cylinder diameter Φ63				Lift valve plate diameter Φ595, cylinder diameter 100
YJD-16 . star loading and unloading equipment		Feed port 300×300, height 400mm, speed 41r/min, gear motor power 1.5kW, output 39.4m3/h
Screw Conveyor	specifying	no N / A				Diameter 300, capacity 30m3/h (fill rate = 0.7)
	Box Reduce speed	no N / A				Model XWD2.2-5-1/59, capacity 2.2kW
Specifications and filter bag material		Diameter × length 130 × 2450, polyester needle felt weight 450g/m2, use temperature 120°C
Insulation area (m2)		26.5	34	41	48.5	70	ninety four	118	124	166
Total weight of the device (approximate value) (Kg)		3110	4400	5700	7000	8940	10750	12570	14380	16200

Equipment advantage

▲ Dust cleaning more thoroughly
Three offline cleaning method (filter, cleaning, static) is adopted to avoid cleaning “re-adsorption”.
▲ More flexible design
According to the requirements of working conditions, the settling chamber can be designed to increase the life of the filter bag, the dust concentration can be as high as 1000g/Nm3.