Related Posts
Characteristics of tunnel variable frequency fan
Decent tunnel variable frequency fan is one of the key recommended products of the fan factory. There are many kinds of tunnel fans produced by our company. The sales of tunnel variable frequency fans are very good, why will customers choose tunnel variable frequency... read more
The advantages of frequency conversion speed regulation in the use of fans
The variable-group energy-saving ventilator for the new tunnel construction is equipped with a variable frequency controller, which can double the efficiency of the ventilator while the original power supply condition remains unchanged, overcoming the traditional start-up method that requires the power supply capacity of... read more
About the maintenance problem of dust removal centrifugal fan
The dust removal fan has been widely used. The air volume of the five air inlets of the dust removal fan will be adjusted according to the dust volume of each suction port to ensure the reasonable distribution of the air volume of each... read more
Happy Birthday To Sunshine Girl!
Our big family ushered in another member’s birthday, everyone wishes her a happy birthday! read more
Order Tracking No.:SCY20220714-United Arab Emirates (UAE)-Shredding Blower
Transaction Country: United Arab Emirates (UAE) Product: Shredding Blower 50% Deposit payments in advance from the customer. 2. Housing and serrated mouth have been finished. 3. Housing and serrated mouth have been finished. 4. Shredding fan has been assembled with impeller,... read more
Precautions for wear and repair of impeller of high pressure centrifugal fan
Received an inquiry from a new customer today, the customer is a well-known local petrochemical company. The previously purchased centrifugal combustion-supporting blower had blade wear. So we recommended wear-resistant treatments and new fans to our customers. Fan impeller wear is related to abrasive composition, particle... read more
Annual purchasing season
The end of 2019 is gradually coming to an annual buying season. Plants and buyers from different countries purchase machinery and equipment to prepare for the new year’s production plan. Philippines customer pays deposit for refrigeration unit in October. Honduran customer pays deposit for Roots fan in... read more
Online communication with customers in the Philippines mine
Today, our company had online communication with customers in the Philippines mine, and at the same time, we showed our production line of centrifugal fans, ID fan, Smoke pump, induced draft fan, centrifugal fan equipment, and introduced our production process and air volume in... read more
The Difference Between Ultra-low Temperature Air Energy Heat Pump and Ordinary Air Energy Heat Pump
Whenever the heating season arrives, most areas in the north will be accompanied by smog. Since the “13th Five-Year Plan”, the central and local governments have paid special attention to the control of environmental pollution, especially smog. The central government has demarcated the Beijing-Tianjin-Hebei air pollution transmission channel for it and directly subsidized the “2+26” cities from the central government to control smog pollution. So the north began the tide of coal-to-electricity and coal-to-clean energy. Two or three years ago, most people didn’t know much about air-to-air heat pump products. If they were slightly impressed, they might be air-to-water heaters, but they didn’t know anything about other products. Such as air-energy floor heating and air-conditioning integrated machine, air-energy heat pump dryer, and so on. After the popularization of “coal-to-electricity” in the north, most people know what an air energy heat pump is. So what is the difference between the ultra-low temperature air energy heat pump used in the north and the ordinary air energy heat pump? The operating conditions of the two are different. We all know that the working principle of the air energy heat pump is to convert the heat in the air into the available high heat energy through the compressor, and then exchange it with the water system to provide hot water, heating, cooling, drying, and other purposes. The temperature environment in which the ordinary air source heat pump operates is preferably within minus 10 ℃. If it operates at minus 10 to 25 ℃, it may appear: 1. Compressor is prone to failure The temperature of the exhaust gas rises rapidly, and the overheating of the working medium is too high. In the case of overheating of the working medium, the thermal conductivity of the working medium in the condenser decreases sharply, and at the same time, the temperature of the lubricating oil increases and the viscosity decreases, which affects the normal lubrication of the compressor. 2. The unit cannot defrost In frequent rain and snow weather and low temperature, the defrosting ability of the unit is easily weakened. Because the air intake of the unit is too small, the density of the air that can be inhaled is reduced. With the accumulation of time, the thickness of the frost layer is getting higher and higher. Therefore, the unit will reduce the circulation of the refrigerant due to the decrease in the air conversion capacity, and the overall heating capacity will decrease. The two technologies involved are different Because of the difference in an ambient temperature between the north and the south, most air energy heat pump manufacturers are located in the southern Guangdong area. The air energy market in the south is extensive. The earliest product is also an air energy water heater. With the development of air energy, its technology is also becoming more and more mature. Heating has also gained a firm foothold in the north, which is also the fundamental reason for the breakthrough growth of coal-to-electricity air-energy heat pumps in the north in the past three years. So what kind of technology does low-temperature air energy have to gain a firm foothold in the cold northern regions? There are three main points: 1. Ultra-low Temperature air Energy Operation Technology Air energy heat pump manufacturers have their own ultra-low temperature technology. Since the air energy heat pump host is generally installed outdoors, the phenomenon of frost will frequently occur in rainy and snowy weather. The ultra-low temperature air energy heat pump host can intelligently judge the defrosting needs, and intelligently judge whether to defrost according to the operating conditions of the unit (running time, exhaust temperature, etc.), combined with the ambient temperature and frost thickness. Defrost with frost and no defrost without frost, greatly extending the defrosting cycle, shortening the defrosting time by 20%, and ensuring the efficient operation of the unit. 2. Jet Enthalpy Technology Because the heating efficiency of the air-energy heat pump in extremely cold weather will be greatly attenuated, resulting in an unsatisfactory heating effect. The ultra-low temperature air energy heat pump uses the jet enthalpy increase technology to create a second suction port on the scroll, and through the second suction circuit, the refrigerant flow is increased, and the circulation volume of the unit is increased during cooling. Compared with the general unit, the cooling capacity is increased by 10%, which greatly improves the refrigerant circulation system, makes full use of the refrigerant flow and utilization rate in the compressor, and improves the stability of the system operation and the heating efficiency. 3. Shell and Tube Heat Exchanger Ordinary air can use a plate heat exchanger, which is easy to scale and block the flow passage. Low-temperature air can use copper tubes with internal thread and external fins. The water inside the tube and fluorine outside the tube. The heat exchange area is large and the heat exchange efficiency is high. read more
7 Tips to Prevent the “Different Bank Account” Scam when you purchase from China
7 Tips to Prevent the “Different Bank Account” Scam More and more buyers are being scammed into wiring tens — sometimes hundreds — of thousands of dollars to the wrong bank account. I helped Global Sources prepare an infographic on how to reduce this risk: This scam... read more